• Home
  • GEN 3 STAGES POWER L | SHIMANO XTR M9100 / M9120 POWER METER

GEN 3 STAGES POWER L | SHIMANO XTR M9100 / M9120 POWER METER

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano XTR M9100/M9120 crank arm. 

Price:
$649.99
Model Number: M9100-L

Please select options before adding to cart

Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to Erin Huck, Nate Hills and the Yeti/Fox Shox Factory Race team,Stages Power for MTB is ridden by the best athletes in the world.  

Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.

Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually at our Boulder, Colorado facility to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.

Additional features:

·         ± 1.5 % accuracy in all conditions

·         Active temperature compensation

·         Accelerometer based cadence measurement 

·         Wirelessly upgradable firmware

·         LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset

·         Updated accelerometer and addition of gyroscope for improved cadence resolution

·         Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength

·         Accuracy: ± 1.5%

·         Power meter housing: low profile design, with robust door interface

·         Weight: Only adds 15g to base crank arm

·         Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter

·         Power range (Watts): 0 to 5000

·         Cadence range (rpm): 10-220

·         Water resistance rating: IPX7

Sizing Options:

·         Lengths: 165mm, 170mm, 175mm 

This Shimano XTR M9100/M9120 Stages Power meter is compatible with Shimano Hollowtech II MTB drivetrains and both XTR M9100/M9120 drive side Q-factors.

Frame Compatibility:  Most frames, see fit guide in our Support section

Device Compatibility: ANT+, Bluetooth Smart Ready 

Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others

Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to Erin Huck, Nate Hills and the Yeti/Fox Shox Factory Race team,Stages Power for MTB is ridden by the best athletes in the world.  

Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.

Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually at our Boulder, Colorado facility to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.

Additional features:

·         ± 1.5 % accuracy in all conditions

·         Active temperature compensation

·         Accelerometer based cadence measurement 

·         Wirelessly upgradable firmware

·         LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset

·         Updated accelerometer and addition of gyroscope for improved cadence resolution

·         Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength

·         Accuracy: ± 1.5%

·         Power meter housing: low profile design, with robust door interface

·         Weight: Only adds 15g to base crank arm

·         Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter

·         Power range (Watts): 0 to 5000

·         Cadence range (rpm): 10-220

·         Water resistance rating: IPX7

Sizing Options:

·         Lengths: 165mm, 170mm, 175mm 

This Shimano XTR M9100/M9120 Stages Power meter is compatible with Shimano Hollowtech II MTB drivetrains and both XTR M9100/M9120 drive side Q-factors.

Frame Compatibility:  Most frames, see fit guide in our Support section

Device Compatibility: ANT+, Bluetooth Smart Ready 

Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others